EARTH MOVING MACHINES
Earth-moving machines fall into the HEAVY DUTY category: resistance to vibrations and shocks, wide (and difficult) environmental thermal conditions, sturdiness of carpentry and connections.
A very demanding sector, with national and international producers. Machinery engineered to function in any condition, often hybrid or bimodal.
We develop Lithium Iron Phosphate and Lithium Polymer batteries for aerial platforms, with direct assembly on the vehicle or inside the customer’s carpentry for total integration with the existing design. Our lithium batteries are equipped on main Italian manufacturers machines, installed and used in over 50 countries around the world.
The integrated BMS management electronics allows us to integrate lithium batteries both within Full Electric, Hybrid and bimodal platforms, according to the machine manufacturer needs. Our batteries guarantee a complete interface with the on-board instrumentation thanks to the CANbus communication integrated on our BMS, as well as a recharge that can be configured according to different management modes.
The battery model is selected depending on the type of vehicle and the torque/power required to drive the drivetrain.
We realized both 24Volt and 48Volt solutions. 24Volt with overall energy between 5 and 20 KWh.
80Volt with overall between10-30KWh.
The advantages of the 80V solution compared to the 24V solution is the overall efficiency of the system, being able to count on lower currents for the same power output, and in the efficiency and size of the significantly more compact electric motor.
However, the nominal 48Volts of the battery allow considerable simplifications being in Utra Low Voltage conditions (<60V cc end of charge) with advantages in terms of safety against electrical risk.
Aliant Battery is a manufacturer of lithium battery packs for loaders, skid steers and excavators: fast charging, low weight and zero maintenance costs. This photo shows an example of a mini excavator, which we made with a 96Volt lithium battery, set up with a single-phase battery charger sealed on board!
EARTH MOVING MACHINES products range
Aliant EK Pegasus Series
Our best-seller: a family of highly performing and customizable traction batteries for Deep Cycle use. It has all the features suitable for use in earth moving machines!
Athena Remote Monitoring
Our pro-active monitoring: thanks to the collection of operating data, we can provide timely diagnostics and at the same time help the end user to make better use of the battery.
Diagnostic and Logging Software
Even without router systems based on WIFI and 4G, it is possible to connect to the battery via USB port and check its status thanks to the local management suite.
Battery chargers
Fast charging stations
In addition to making the batteries compatible with the charging system from a public column, for universal use, we have in our catalog a series of Ultrafast type battery chargers suitable for rapid charging. Even just 8-10 minutes may be enough!
Battery charger for fixed installation
Don’t you need ultra-fast feeding? No problem: we have a series of single-phase and three-phase battery chargers for “wall-mounted” installation that can satisfy all the needs for electrical power used and charging times.
Onboard charger
If you are afraid to lose the charger, put it in the vehicle! Thanks to the close collaboration with the main international manufacturers, we can offer you IP66 battery chargers for mounting on board, equipped with interface for MODO 3
Accessories
Display
Don’t want to waste time customizing your vehicle’s display? Don’t worry, we’ll take care of it!
Connectors
In addition to the battery, we can supply a series of connectors for signal and power that we manage in the catalog and in the warehouse.
Certifications
We are available to evaluate the specific certifications required in terms of electromagnetic compatibility, environmental and safety required by your application.
